Customization: | Available |
---|---|
Application: | Power, Electronic |
Phase: | Three |
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Power Faction Correction
The self-healing PFC capacitor for low voltage application produced by Huizhong are using the PP film with special metallization of Zn/AL and self-made filling material for the impregnation.The capacitors are manufactured in accor-dance with standard of GB/T12747-2004 and IEC60831-1+/2,which are mainlyapplied in Low voltage foe increasing the power quality.The product performance has been inproved a lot these years with low loss,low heat dissipation,no leakage,long life and consistency in quality.through our research and experiment.
Power Capacitor Power Faction Correction
Power Capacitor (Polyproplene film capacitor) |
|||
Standard IEC60831-1/2,UL810 |
|||
Product series |
H55334 Three Phase |
H55324 Three Phase |
H55100 Single Phase |
Features |
|||
Output Kvar |
5Kvar-30Kvar |
0.5Kvar-5Kvar |
0.7Kvar-5Kvar |
Rated frequecy |
50/60Hz |
50/60Hz |
50/60Hz |
Rated voltage |
230Vac-525Vac |
230Vac-525Vac |
230Vac-525Vac |
Capacitor tolerance |
-5%/+10% other on request |
-5%/+10% other on request |
-5%/+10% other on request |
Electrical test VTT |
2.15 x VR during 2s |
2.15 x VR during 2s |
2.15 x VR during 2s |
Insulation VTC |
3000VAC/50Hz during 10s |
3000VAC/50Hz during 10s |
3000VAC/50Hz during 10s |
*tan 6 (50Hz) |
≤1.0x10-3 |
≤1.0x10-3 |
≤1.0x10-3 |
Protection degree |
IP20 |
IP00(IP50 on request) |
IP00(IP50 on request) |
Max.permissible voltage Vmax |
VR+10%(up to 8h daily)/VR + 15%( up to 30min daily)/ VR + 20%( up to 5min daily)/ VR+ 30%( up to 1min daily) |
||
Max.permissible current Vmax |
UP to 1.3·IR(A)(1.5·IR including combined effects of harmonice,over voltage and capacitance tolerance) |
||
Surge current Is |
UP to 200·IR(A) |
||
Power dissipation* |
≤0.2W/Kvar(dielectric) and ≤0.45 W/Kvar(total) |
||
Temperature |
-40/D.Max.55°C |
||
Humidity |
Av.rel.<95% |
||
Maximum altitude |
4000m |
||
Mean life expectancy |
Up to100000 hours at temperature class -40/D |
||
Switching |
Max.5000 switchings per year acc.to IEC60831 |
||
Safety |
|||
Mechanical safety |
Overpressure disconnector |
||
Max.short cicuit current |
AFC:10kA according UL810 standard |
||
Discharge resistor |
≤60s to 75V or less |
||
Power Capacitor (Polyproplene film capacitor) |
|||
Standard IEC60831-1/2,UL810 |
|||
Material |
Aluminium can and top |
Aluminium can and top |
Aluminium can and top |
Dimensions |
Φ:76-96mm H:163-350mm |
Φ:50,63.5mm H:148mm |
Φ:63.5mm H62.5,75,100,125mm |
Terminals |
SIGUT terminal Max.Torque:2Nm Max.cable cross section:25mm2 |
#250 fast-on terminal 6.3x0.8 creepage distance:≥12.7mm Max. Current:15A |
#250 fast-on terminal 6.3x0.8 creepage distance:≥12.7mm Max. Current:15A |
Impregnation |
Non PCB,resin filling: soft polyurethane resin |
||
Fixing |
Threaded bolt M12 |
||
Max.Torque(AI can stud) |
10Nm |
||
Approval |
|||
|
Third part test approval internal test approval |
||
Standard terminals |
|
||
Discharge resistor |
|
||
Standard Monting |
|